YOKOGAWA F3LR02-0N, Руководство пользователя

Страница: 34 / 210

A4-4
IM 34M06H45-01E 7th Edition : Aug.30, 2019-00
A4.3 Attaching and Detaching Modules
A4.3.1 Attaching the Module
Figure A4.3 shows how to attach this module to the base module. First hook the anchor
slot at the bottom of the module to be attached onto the anchor pin on the bottom of
the base module. Push the top of this module towards the base module until the yellow
anchor/release button (yellow button) clicks into place.
CAUTION
Always switch off the power before attaching or detaching a module.
F01.VSD
Base module
This module
Anchor pin
Figure A4.3 Attaching/Detaching the Module
CAUTION
DO NOT bend the connector on the rear of the module by force during the above
operation. If the module is pushed with improper force, the connector may bend causing
an error.
A4.3.2 Detaching the Module
To remove this module from the base module, reverse the above operation. Press the
anchor/release button (yellow button) on the top of this module to unlock it and tilt the
module away from the base module. Then lift the module off the anchor pin at the base.