YOKOGAWA F3LP32-0N Скачать руководство пользователя страница 4

Страница: 4 / 104

IM 34M06H43-02E 2nd Edition : Sep.30, 2019-00

Precautions



About This Manual

This Manual should be passed on to the end user.

This manual is an essential part of the product; keep it in a safe place for future

reference.

This product is designed to be used by a person with specialized knowledge.

Before using the product, read this manual thoroughly to have a clear understanding

of the product.

This manual explains the functions of this product, but there is no guarantee that

they will suit the particular purpose of the user.

Under absolutely no circumstances may the contents of this manual be transcribed

or copied, in part or in whole, without permission.

The contents of this manual are subject to change without prior notice.

Every effort has been made to ensure accuracy in the preparation of this manual.

However, should any errors or omissions come to the attention of the user, please

contact the nearest Yokogawa Electric representative or sales office.



Safety Symbols

”Handle with care.”

This symbol on the product indicates that the operator must

follow the instructions laid out in this user's manual to avoid the risk of personnel

injuries, fatalities, or damage to the instrument.

Protective Conductor Terminal

This terminal is to prevent electric shock. Before using the instrument, connect to

the Protective earth (Comply with the regulation of each country.), and route the line

through the shortest path possible.

Functional Earth Terminal

This terminal is for stable operation. Before using the instrument, be sure to ground

this terminal.

Alternating current.

Indicates alternating current.

Direct current.

Indicates direct current.

Содержание F3LP32-0N









































































































Результаты поиска

Содержание F3LP32-0N

Отзывы:

Бренды по названию

Популярные бренды

YOKOGAWA F3LP32-0N, Руководство пользователя

Результаты поиска

Содержание F3LP32-0N

Отзывы:

Бренды по названию

Популярные бренды