YOKOGAWA DXAdvancedR4 DX1000, Руководство пользователя

Страница: 8 / 26

6
IM 04L41B01-19E
What the DX Can Do
The DX provides the following functions:
• Participate in an PROFIBUS-DP network as a PROFIBUS-DP slave.
• Communicate with a PLC from Siemens.
• The master can access internal data of the DX.
Data Access
Measurement channel data Read
Computation channel
*1
data Read
Communication input data
*1*2
Write
*1 This is an option (/M1 and /PM1).
*2 Communication input data, if coded in a calculation expression in the computation channel,
can be displayed on the DX.
The following shows examples of usage.
• Data on devices on a network can be recorded by a PLC to the DX.
• Data measured by the DX can be acquired by a PLC.
Settings of the DX
The DX is ready to use after the node address settings have been made.
Access to the DX
The DX is a passive device on an PROFIBUS-DP. The DX cannot initiate a request. PLC,
a class 1 master device, initiates a request and accesses the DX.
Introduction of Features