YOKOGAWA DTSXL, Руководство пользователя, Страница: 204 / 289

< PART – B Software >
B-121
IM 39J06B40-01EN 14th Edition: May 30, 2022
B9.2.1. Number of Alarm Sections
Select the number of alarm sections.
If [More Sections] is disabled, up to 10 alarm sections can be used.
If [More Sections] is enabled, up to 50 alarm sections can be used, but there will be
some restrictions on alarm conditions.
B9.2.2. Alarm Section
Select whether to use an individual alarm section using its Use flag.
- Specify the Start Depth and Depth (distance from the Start Depth) for each alarm
section as a value between 0.1 m to 50000.0 m in units of 0.1 m.
- The End Depth is calculated automatically and thus need not be specified.
- When specifying contiguous alarm sections where the Start Depth of a section
coincides with the End Depth of the preceding section, you can save typing by
deselecting the STR checkbox.
- If an entered Start Depth is before the End Depth of the preceding section, an error
is reported and the entered value is rejected.
-
B9.2.3. Alarm Conditions
Define the alarm detection condition for each alarm section.
Clicking the [Setting] button in an alarm section row on the Alarm Setting tab window
displays the following pop-up dialog window for detailed configuration of the alarm
section.
Section 1
Depth
Section 2
Depth[m]
Start
Depth
End
Depth
Depth
Start
Depth
Section 3
End
Depth
Start
Depth
End
Depth
250 200 100 350 450