YOKOGAWA DTSXL, Руководство пользователя, Страница: 192 / 289

< PART – B Software >
B-109
IM 39J06B40-01EN 14th Edition: May 30, 2022
B8.4.2. HTTP Client Function
Converted data files can be transmitted to an external HTTP server using the HTTP
client function of DTSX3000.

Specifications
The table below describes the specifications of the HTTP client function of the
DTSX3000.
Message Specification Remarks
Protocol
HTTP DTSX3000 determines the protocol to be used according
to
HTTPS the specified destination URI.
Method
PUT Specify the method matching the setting at the server
side.
POST If POST is selected, CGI is required at the server side.
User authentication Basic DTSX3000 determines the authentication scheme
scheme Digest automatically by communicating with the HTTP server, and
Via proxy Supported performs authentication using a user ID and a password.
File formats Text
Compressed (Files are compressed to gzip format and appended with
“
.gz” file extension before transmission)
Server authentication No authentication is performed with respect to an SSL server certificate
from a server. (*)
* : Connect only to a HTTP server within the same local network with a visible network configuration.

Transmission related settings
The table below lists the transmission related settings.
Each setting can be specified via Modbus or DTSX3000 Data Conversion Software.
SEE ALSO
- For details, see the "DTAP3000 LAS2.0 Guide (IM39J02B40-02EN)".
- For details on configuration via Modbus, see the "DTSX3000 Communications Guide
(IM39J06B40-02EN)".
No. Item Description
1
Server
Configuration
(Destination
configuration)
Configure the destination server by specifying:
(1) URI (HTTP server address and directory)
(2) User ID and password
The HTTP protocol or HTTPS protocol is used for communication if the
specified URL begins with “http://” or “https://” respectively.
The specified user ID and password is used for authentication according to the
authentication scheme of the specified directory.
2
Use Proxy If the HTTP server is accessed via a proxy server in a network environment,
specify the following settings:
(1) Hostname or IP address of the proxy server
(2) Port number
3
HTTP method Select PUT or POST. If you have selected POST, specify the form data name
(The data name to be passed to the CGI on the HTTP server side.)
4
Transmit Files
(file transmission
mode)
Select one of the following file transmission modes for determining the files to
be transmitted.
New Transmits newly created files as and when
available. Files created in the past are not
transmitted.
Newer Than The Last
Transmission
Transmits files created after the last transmitted
file. Newly created files are also transmitted.
Since Selection Transmits files created after a selected file.
Newly created files are also transmitted.