YOKOGAWA DTSXL, Руководство пользователя, Страница: 154 / 289

< PART – B Software >
B-71
IM 39J06B40-01EN 14th Edition: May 30, 2022
B6.5.4. CV Software Related Settings
CV Software related settings can be used to configure communications between the
DTSX3000 and the DTSX3000 Control Visualization Software as follows:
- Allow or disallow connection with the DTSX3000 Control Visualization Software
- Port number for DTSX3000
- Communication timeout duration
- Make port number public or non-public
After specifying the required settings, click the [Set] button. The DTSX3000
configuration will be updated but the changes will be applied only after reboot.
・
CV Soft
Select whether to allow connection with the DTSX3000 Control Visualization
Software. Select [valid] if using the software, and select [invalid] if not using the
software. Selecting [invalid] will shorten the measurement time by omitting the
creation of data files used for communication between DTSX3000 and the software.
The default value is [valid].
Tip
The measurement time saving achievable by disallowing connection with the DTSX3000 Control
Visualization Software varies with the measurement conditions.
The DTSX3000 Data Conversion Software can always be used regardless of the value of this setting.
・
Port Number for CVSoft
Specify any port number from 1024 to 65535. The default value is 34416.
・
Comm Timeout[sec]
Specify any communication timeout duration between 5 and 1800 (seconds). The
default value is 600.
・
SSH Enable
Selecting [yes] for SSH Enable makes the communications port dedicated for use
by the DTSX3000 Control Visualization Software non-public (disallows connection
externally of DTSX3000). To connect to the communications port, port forwarding by
SSH is required. Selecting [yes] for SSH Enable makes the port public (allows
connection externally of DTSX3000).