YOKOGAWA DPharp EJA510E, Руководство пользователя

Страница: 64 / 65

i
IM 01C25F01-01E
Revision Information

Title : Absolute Pressure and Gauge Pressure Transmitters
EJ

510

, EJ

530

, EJX610A and EJX630A

Manual No. : IM 01C25F01-01E
Edition Date Page Revised Item
1st Aug. 2004 — New publication.
11th June 2014 1-2 1. • Add note for symbols.
2-6 2.9.2 • Revise category for CSA Nonincendive.
2-13 2.12 • Update safety requirement standard.
6-1 to 6-4 6. • Revise drawings and symbols for terminal.
6-1 6.3.1 • Add note for power supply.
6-2, 7-1 Add note for BRAIN communication.
7-3 to 7-8 7.5 • Add local parameter setting function.
9-10 9.4 • Change terminal drawing.
12th Oct. 2014 2-3 2.8 • Add information for 1 to 5 V output.
2-5 2.9.1 • Add information for 1 to 5 V output.
2-7, 2-8 2.9.2 • Add information for 1 to 5 V output.
2-9 to 2-11 2.9.3 • Add information for 1 to 5 V output.
2-13 2.9.4 • Add EPL code. Revise applicable standard. Add information for
1 to 5 V output. Add note for electro static charge. Add electrical
connection.
2-14 2.10 • Add standard for PROFIBUS.
6-1 6.3 • Add Figure 6.1 Terminal.
6-2 6.3.3 • Add information for 1 to 5 V output.
6-3 to 6-4 6.4 • Add information for 1 to 5 V output.
6-5 6.6 • Add applicability.
7-4 7.5.1 • Add “10.Device information” in Figure 7.7.
7-5 7.5.3 • Add note in the figure.
7-6 7.5 • Add 7.5.6 Pressure LRV/URV Configuration.
7-7 7.5 • Add 7.5.8 Output Mode Configuration and 7.5.9 Display Out 1
Configuration.
8-8 8.5.3 • Correct AL31 output operation.
9-2 to 9-4 9.1 • Add information for 1 to 5 V output.
• Add information for /HG.
9-4 • Add EMC standard for PROFIBUS and EMI specification.
9-7 9.2 • Add output signal code Q
9-8 9-3 • Revise the description for SU2 and SF2.
9-9 • Add /HG
9-11 9.4 • Add information for 1 to 5 V output.
13th July 2015 1-2 • Add trademark statement.
1-3 1.1 • Add (g) and (h).
2-1 2.1 • Replace Figure 2.2.
2-5, 2-7, 2-9, 2-15 • Delete /V1F.
2-6, 2-7 2.9.2 • Add “No.61010-2-030.”
2-12 2.9.3 (6) • Replace nameplate.
2-12 to 2-13 2.9.4 • Add SU21. Add a and b.
2-15 2.10 • Change the note for EN 61326-2-5.
2-16 2.12 • Add C22.2 standards.
7-4 7.5.1 • Delete note for -Q in Figure 7.7.
7-5 7.5.3 • Change note in the figure.
9-4 9.1 • Revise descriptions for EMC conformity standards.
9-5 to 9-7 9.2 • Delete #.
9-8 9.3 • Add SU21.