33
Precision Making
Appendix A
– DL850E(V) knobs and keys
ScopeCorder introduction workbook
Copyright © Yokogawa Electric Corporation
ESC key
Use to clear setup menus and pop-up menus
Soft keys
Use to select items on the setup menus that appear during configuration
Jog Shuttle
Use to change values and move
cursors. Turn the shuttle ring to vary
the rate at which values change. The
rate is based on the shuttle ring
angle.
Setup and execution
keys and knobs
Probe compensation signal output
terminal
1kHz, 1V
P-P.
Transmits correction signals for probes.
Functional ground terminal
Connect a ground wire to this terminal
when performing probe correction.
Setup and execution keys
KEY PROTECT key
