manualshive.com logo in svg

YOKOGAWA DL850 ScopeCorder, Руководство пользователя, Страница: 95 / 190

Поделиться
Скачать
YOKOGAWA DL850 ScopeCorder Скачать руководство пользователя страница 95

4-11

IM DL850-03EN

Common Operations

1

2

3

4

5

6

App

Index

4.5  Performing Auto Setup

The auto setup feature automatically sets the V/div, Time/div, trigger level, and other settings to the 
most suitable values for the input signals.

SETUP Menu

Press 

SETUP

 to display the following menu.

 

Executes auto setup

Undoes auto setup

Center Position after the Execution of Auto Setup

The center position after you execute auto setup will be 0 V.

Applicable Modules

Auto setup is performed on the following modules.
701250(HS10M12), 701251(HS1M16), 701255(NONISO_10M12), 701267(HV(with RMS)), 
701261(UNIVERSAL), 701262(UNIVERSAL(AAF)), 701275(ACCL/VOLT), 720210(HS100M12), 
720220(16CH VOLT)

Channels That Auto Setup Is Performed On

Auto setup is performed on all channels except logic channels.
Logic waveforms are displayed with the same settings as before you executed auto setup.

Waveforms Displayed before the Execution of Auto Setup

When you perform auto setup, the data in the acquisition memory is overwritten, and the waveforms 
that were displayed before you executed auto setup are cleared.

Undoing Auto Setup

You can press the Undo soft key to revert to the settings that were in effect before you executed auto 
setup. You cannot undo auto setup if you switch to a different setup menu or clear the SETUP menu 
using the ESC key.

Содержание DL850 ScopeCorder































































































































































































Отзывы:

Нет отзывов