YOKOGAWA DL850 ScopeCorder Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 190

YOKOGAWA DL850 ScopeCorder Скачать руководство пользователя страница 12

x

IM DL850-03EN

Safety Precautions

This instrument is an IEC safety class I instrument (provided with a terminal for protective earth
grounding).
The general safety precautions described herein must be observed during all phases of operation.
If the instrument is used in a manner not specified in this manual, the protection provided by the
instrument may be impaired. YOKOGAWA assumes no liability for the customer’s failure to comply
with these requirements.

The following symbols are used on this instrument.

Warning: handle with care. Refer to the user’s manual or service manual. This symbol appears

on dangerous locations on the instrument which require special instructions for proper handling
or use. The same symbol appears in the corresponding place in the manual to identify those
instructions.

Risk of electric shock

Protective ground terminal

Ground or the functional ground terminal (do not use as the protective earth ground terminal)

Alternating current

ON (power)

OFF (power)

«
...
10
11
12
13
14
...
»

Содержание DL850 ScopeCorder































































































































































































Отзывы:

Нет отзывов