YOKOGAWA DL850 ScopeCorder Скачать руководство пользователя страница 118

Страница: 118 / 190

6-10

IM DL850-03EN

Other Features

Item

Specifications

Initialization

Resets settings to the factory default (excluding the date and time setting, communication interface

settings, language setting, and time difference from GMT setting). The reset can be undone.

Auto setup

Automatically sets the voltage axis, time axis, trigger, etc. The automatic settings can be undone.

Action

Outputs screen capture data, saves waveform data (to binary, ASCII, or floating-point), sounds

a notification buzzer, transfers an e-mail, or performs some combination of the previous actions

whenever a trigger occurs or waveform acquisition stops

E-mail transmission

Sends e-mail using SMTP

Calibration

Auto or manual

System settings

Screen color, date and time, message language, menu language, click sound on/off, and grid

thickness

Overview

The system specifications can be displayed.

Self tests

Memory test, key test, printer test, and storage test

Help feature

Displays a description of the settings

PROTECT key

You can lock the keys to prevent unintentional operations.

NUM key

You can enter numbers directly.

Japanese string input

Compact-VJE Ver.3.0

6.6 FFT

Item

Specifications

Waveform to be computed

CHn or MATHn

Number of channels

1 (on models without the /G2 option), 2(on models with the /G2 option)

Computation range

From the specified computation start point until the specified number of points have been computed

Computed points

1 k, 2 k, 5 k, 10 k, 20 k, 50 k, or 100 k

Time windows

Rect, Hanning, Hamming, FlatTop, and Exponential (on models with the /G2 option)
When the Exponential time window is selected, the following settings must be configured.

Damping rate:

The weight of the last data point, with the weight of the first data point in

the specified number of FFT points taken to be 100% (= 1).

Selectable range:

1 to 100%

Resolution:

Force1:

Set the area over which computation is performed in terms of a

percentage from the first FFT point, taking the number of FFT points to

be 100%.

Selectable range:

1 to 100%

Resolution:

Force2:

This setting applies to the output (response) signal (second parameter)

of a two-waveform FFT.

Selectable range:

1 to 100%

Resolution:

Display window

The FFT computation results are displayed in a separate window independent from the normal

waveform display.
Display range:

Set the display range by setting Center and Sensitivity.

6.5 Features

Содержание DL850 ScopeCorder































































































































































































Результаты поиска

Содержание DL850 ScopeCorder

Отзывы:

YOKOGAWA DL850 ScopeCorder, Руководство пользователя, Страница: 118 / 190

Результаты поиска

Содержание DL850 ScopeCorder

Отзывы: