YOKOGAWA DL7480 Скачать руководство пользователя страница 86

Страница: 86 / 176

2-31

IM 701450-51E

CAN Bus Signal Analysis Function

Detailed List of Analysis Data: Detail

Details of the analysis results list on the lower section of the screen are displayed. The

following eight items are displayed.

• Frame Type

R (Remote Frame), D (Data Frame), and E (Error Frame)

• No.

With the trigger target frame set to 0, the frame is numbered No. -1, No. -2, and so on

before the target frame and No. 1, No. 2, and so on after the target frame. Displayed

in the range between –16000 and 16000.

• Time (ms)

The time from the trigger point to the Start of Frame is displayed.

• ID

The Identifier value (in standard format (11 bits) or extended format (29 bits)) is

displayed in hexadecimal.

• Data

The Data field value is displayed in Hex (hexadecimal) or Bin (binary).

• CRC

The CRC value is displayed in Hex (hexadecimal).

• ACK

The Acknowledge value is displayed as Y. (If Acknowledge is returned Y is displayed,

and if Acknowledge is not returned, nothing is displayed.)

If indefinite data is present within the frame, an asterisk (*) is displayed.

• Info.

An error type of one of the following five types is displayed.

Active, Passive, Form, CRC, or ACK (Acknowledge)

Hex (hexadecimal) or Bin (binary) can be selected in the Hex/Bin setting menu displayed at

the same time as the detailed analysis list.

Data field value (hexadecimal or binary)

CRC value (hexadecimal)

Alphabet indicating the frame type
R (Remote Frame), D (Data Frame), and E (Error Frame)

Identifier value (hexadecimal)

Analysis number

Time from the trigger
point to Start of Frame

Error type

Acknowledged value

Immediately after analysis executes, the No. 0 frame is automatically highlighted. Turn

the jog shuttle to highlight select an arbitrary frame. Display of the detailed analysis list

and analysis results list are linked.

Note

The contents of the detailed analysis list can be saved in ASCII format. For details, see

section 2.7, “Saving the Data of the Detailed Analysis List.”

2.5 Analyzing/Searching Data

Содержание DL7480

















































































































































































Результаты поиска

Содержание DL7480

Отзывы:

Похожие инструкции для DL7480

Бренды по названию

Популярные бренды

YOKOGAWA DL7480, Руководство пользователя

Результаты поиска

Содержание DL7480

Отзывы:

Похожие инструкции для DL7480

Бренды по названию

Популярные бренды