YOKOGAWA DL7480 Скачать руководство пользователя страница 37

Страница: 37 / 176

1-32

IM 701450-51E

Range That Can Be Analyzed

Analysis is performed on the acquisition data within the display screen. Up to 40000

bytes of the analysis results can be displayed. The displayed result varies depending on

the number of bytes analyzed as follows:

• When the total analysis result is less than or equal to 40000 bytes

All points are displayed regardless of the position of the Reference Point.

• When the total analysis result is greater than 40000 bytes

The displayed result varies depending on the number of analysis results on the Pre*

and Post* sides as follows:

• When the Pre side=30000 and the Post side=30000 -> Displays Pre side=20000

and Post side=20000

• When the Pre side=10000 and the Post side=50000 -> Displays Pre side=10000

and Post side=30000

• When the Pre side=50000 and the Post side=10000 -> Displays Pre side=30000

and Post side=10000

Pre:

Before (left of) the reference point

Post:

After (right of) the reference point

Notes When Performing Analysis

• Analysis and search cannot be performed while the waveform acquisition is started.

• Analysis and search cannot be performed on accumulated waveforms.

Analysis Data List (Analysis Result List)

The following three items are displayed.

• Analysis number

• Hexadecimal display of the analyzed data

• Acknowledge bit condition

Analysis Number: No.

Up to 40000 points can be displayed.

Hexadecimal Display of the Analyzed Data: Hex

The analyzed data is displayed using hexadecimal notation. However, if a byte of data is

less than 8 bits, the data is not displayed. If indefinite data exists, “

∗

” is displayed.

Indefinite data is considered the same value as the previous bit for the analysis. If the

first data is indefinite, it is considered 0 for the analysis.

Acknowledge Bit Condition: Ack

Displays the Acknowledge bit condition. Displays 0 if the Acknowledge bit is present;

displays 1 if the Acknowledge bit is not present.

Note

If you execute the analysis and select (highlight) an arbitrary byte in the list of analysis

results, the Zoom Position moves to the head of that byte. In addition, if you move the Zoom

Position, the highlighting moves to the corresponding byte in the list of analysis results.

1.5 Analyzing/Searching Data

Содержание DL7480

















































































































































































Результаты поиска

Содержание DL7480

Отзывы:

Похожие инструкции для DL7480

Бренды по названию

Популярные бренды

YOKOGAWA DL7480, Руководство пользователя

Результаты поиска

Содержание DL7480

Отзывы:

Похожие инструкции для DL7480

Бренды по названию

Популярные бренды