45
IM 701450-61E
:MEASure:CHANnel<x>:{<Parameter>}:{COUNt|
SDEViation|MAXimum|MEAN|MINimum}?
Function
Queries the statistical value of the power
analysis parameter.
Syntax
:MEASure:CHANnel<x>:{<Parameter>}:
{COUNt|SDEViation|MAXimum|MEAN|MINimum}?
<x> = 1 to 6 (1 to 4 on the DL7440)
<
Parameter
> = {AH|AHN|AHP|I2T|IAC|
IDC|IMN|INPeak|IPPeak|IPTopeak|IRMN|
IRMS|LAMBda|P|Q|S|UAC|UDC|UMN|
UNPeak|UPPeak|UPTopeak|URMN|URMS|WH|
WHN|WHP|Z}
Example
:MEASURE:CHANNEL1:UPTOPEAK:MAXIMUM?
-> :MEASURE:CHANNEL1:UPTOPEAK:
MAXIMUM 10.00
Description The power analysis parameters below can be
substituted using standard waveform
parameters.
UPTopeak, IPTopeak
= PTOPeak
UPPeak, IPPeak
= MAXimum
UNPeak, INPeak
= MINimum
UDC, IDC
= AVERage
URMS, IRMS
= RMS
UAC, IAC
= SDEViation
:MEASure:CHANnel<x>:{<Parameter>}:STATe
Function
Turns ON/OFF the power analysis parameter
one by one or queries the current setting.
Syntax
:MEASure:CHANnel<x>:{<Parameter>}:
STATe {<Boolean>}
:MEASure:CHANnel<x>:{<Parameter>}:
STATe?
<x> = 1 to 6 (1 to 4 on the DL7440)
<Parameter> = {AH|AHN|AHP|I2T|IAC|
IDC|IMN|INPeak|IPPeak|IPTopeak|IRMN|
IRMS|LAMBda|P|Q|S|UAC|UDC|UMN|
UNPeak|UPPeak|UPTopeak|URMN|URMS|WH|
WHN|WHP|Z}
Example
:MEASURE:CHANNEL1:UDC:STATE ON
:MEASURE:CHANNEL1:UDC:STATE? ->
:MEASURE:CHANNEL1:UDC:STATE 1
Description The power analysis parameters below can be
substituted using standard waveform
parameters.
UPTopeak, IPTopeak
= PTOPeak
UPPeak, IPPeak
= MAXimum
UNPeak, INPeak
= MINimum
UDC, IDC
= AVERage
URMS, IRMS
= RMS
UAC, IAC
= SDEViation
:MEASure:CHANnel<x>:{<Parameter>}:VALue?
Function
Queries the value resulting from the automated
measurement of the power analysis parameter.
Syntax
:MEASure:CHANnel<x>:{<Parameter>}:
VALue? {<NRf>}
<x> = 1 to 6 (1 to 4 on the DL7440)
<
Parameter
> = {AH|AHN|AHP|I2T|IAC|
IDC|IMN|INPeak|IPPeak|IPTopeak|IRMN|
IRMS|LAMBda|P|Q|S|UAC|UDC|UMN|
UNPeak|UPPeak|UPTopeak|URMN|URMS|WH|
WHN|WHP|Z}
<NRf> = 1 to 24000
Example
:MEASURE:CHANNEL1:UMN:VALUE? ->
:MEASURE:CHANNEL1:UMN:
VALUE 5.000
Description •
<NRf>
can be omitted. If omitted, inquiry is
made on the parameter value of the newest
history waveform.
<NRf>
is used to query
the parameter value of the
<NRf>
times after
executing the statistical processing. If the
value corresponding to the relevant count is
not present, “NAN” (Not A Number)” is
returned.
• The power analysis parameters below can be
substituted using standard waveform
parameters.
UPTopeak, IPTopeak = PTOPeak
UPPeak, IPPeak
= MAXimum
UNPeak, INPeak
= MINimum
UDC, IDC
= AVERage
URMS, IRMS
= RMS
UAC, IAC
= SDEViation
12 Communication Commands
