5-18
IM 701830-01E
5.14 Setting the Logic Probe
(For Logic Input Module and /N1 32-bit extended logic input)
Function
ON/OFF of bit display:Bit Display
Allows you to select whether or not to display the waveform for each bit.
Mapping the logic waveform: Bit Mapping
OFF : The spaces for the bit waveforms that are turned OFF are maintained.
ON : The spaces for the bit waveforms that are turned OFF are not maintained. Only the bit
waveforms that are turned ON are displayed in order from the top.
A1
A3
A2
A4
A5
A6
A8
A1
A3
A2
A4
A5
A6
A8
OFF(when Bit7=OFF on POD A)
ON(when Bit7=OFF on POD A)
Operating Procedure
1.
Press one of the keys (channel key which has the logic input module installed)
CH1
to
CH16
to select the channel. To select the optional 32-bit extended logic input (/N1), press
the
SHIFT
key and then either the
CH1
key (LOGIC1) or the
CH2
key (LOGIC2).
2.
Press the “
Bit Display
” soft key to display the display ON/OFF setting screen.
3.
Move the cursor to the bit you wish to turn ON with the jog shuttle.
4.
Press the
SELECT
key to turn it ON.
Selecting “
ALL ON
” turns all items ON at once.
Selecting “
ALL OFF
” turns all items OFF at once.
5.
Repeat steps 3 and 4 as necessary.
Mapping the logic waveform
6.
Press the “
Bit Mapping
” soft key to select “
ON
” or “
OFF
.”
