YOKOGAWA DL716, Руководство пользователя

Страница: 132 / 255

8-1
8
IM 701830-01E
Display
8.1 Changing the Display Format
Function
Main Format
Single: 1 waveform window Quad : 4 waveform windows
Dual : 2 waveform windows Hexa : 6 waveform windows
Triad : 3 waveform windows Octal : 8 waveform windows
Mapping
Auto : Windows are arranged from top to bottom in order: CH1, CH2,..., Math1, Math2. But no
windows are shown for channels for which display is set OFF.
Fixed : Channels are displayed regardless of whether display is set ON or OFF, in order of
channel number. The Math2 window is at the bottom, with the Math1 window directly
above it.
User : You can assign waveforms arbitrarily to the windows regardless of ON/OFF condition
of the display. You can select the display position from numbers 0 to 7. The
waveforms are assigned in order from top to bottom starting from number 0.
CH1 , CH5 , CH10 , CH14
CH2 , CH6 , CH11 , CH15
CH3 , CH8 , CH12 , CH16
CH4 , CH9 , CH13
Fixed(If CH7=OFF)
Auto(If CH7=OFF)
User(Set number 4 to CH2, 1 to Math1, and
0 to Math2, when using 4 waveform
windows.)
CH2 , Math2
Math1
0, 4
1, 5
2, 6
3, 7
Displayed in order
according to the set
numbers.
CH1 , CH5 , CH9 , CH13
CH2 , CH6 , CH10 , CH14
CH3 , CH11 , CH15
CH4 , CH8 , CH12 , CH16
The number of points that can be displayed vertically for each channel varies as follows
according to the display format. However, the vertical resolution remains unchanged.
Single(
) : 432 points Quad( ) : 108 points
Dual( ) : 216 points Hexa( ) : 72 points
Triad( ) : 144 points Octal( ) : 54 points
Operating Procedure
1.
Press the
DISPLAY
key.
2.
Keep pressing the “
Main Format
”soft key to select the desired format from “
Single
” to
“
Octal
.”
3.
Press the “
Next
” soft key, so that it changes to “
Next 2/2
.”
4.
Press the “
Mapping
” soft key and select one from “
Auto
” to “
User
.”
Set the display position (only when
“
Mapping
”
is set to
“
User
”
)
5.
Select the channel/computed waveform with the jog shuttle and the
SELECT
key and set
the display position.
→
→
Note
In addition, an extra window is provided to display computed waveforms as well as information other than
waveforms, such as automatically measured waveform parameters. For details refer to page 8-7.
Chapter 8 Display