YOKOGAWA Datum Y XL100, Руководство пользователя

Страница: 8 / 51

7 IM XL120P
1. HOME Key
Press this key to enable Free Running Mode for measuring instantaneous values (see
page 21).
2. REVIEW Key
Press this key to enable Logging & Review Mode in which past measured data can be
viewed while logging (see page 21) or enable Review Mode in which saved data can
be analyzed (see page 21).
3. FILE Key
Press this key to enable File Operation Mode in which file names can be changed,
measured data can be copied, setting data can be saved or loaded, and so on (see
page 21).
4. SETTING Key
Press this key to set measurement conditions, conditions for saving measured data,
alarm conditions, etc.
5. HOLD Key
Press this key to hold the display so that the measured values are not updated or to
release the display. In addition, hold this key down to enable or disable key lock.
6. TIME/DIV Key
Press this key to switch the time axis (the time per grid (division)).
7. ESC Key
Press this key to cancel a key operation.
8. SET Key
Press this key to set settings entered through the keys.
9. START/STOP Key
Press this key to start/stop logging.
10. RANGE Key
Press this key to change the input range or span (scale).
11. DISPLAY Key
Press this key to switch the display in Free Running Mode or Logging Mode (see page
22). Press this key also to switch between marker display and statistical calculation
display in Review Mode.
12. SAVE Key
Press this key to manually save or print the measured data or screen data.
13. GROUP Key
Press this key to switch the displayed group of measurement, calculation, and
communication input channels.
14. Fast Forward Key
Press this key to move the marker to the left or right by 1 division on the review display
(see page 43).
15. MARK Key
Press this key to select a marker to be activated on the review display (see page 43).
16. Arrow/SELECT Key
Press the arrow keys to select items on the display. Press this key also to move the
marker to the left or right on the review display (see page 43).
Press the SELECT key to confirm a selection.
3. Names and Functions of Parts