YOKOGAWA Daqstation DX2000 Скачать руководство пользователя страница 182

Страница: 182 / 366

5-2

IM 04L42B01-01E

Note

The channel settings of a display group can be copied to another group on a DX with release
number 2 or later.

Procedure

1. Select the copy source channel settings.
2. Press the

Copy

soft key.

3. Select the copy destination channel settings.
4. Press the

Paste

soft key. The channel settings are copied.

• Trip line

Set lines at specified positions in the waveform display range on the Trend display.

• On/Off

Turn

the trip lines you want to display.

• Position

Set the position in the range of 0 to 100% of the display width.

• Color

The default colors are red, green, blue, and yellow. If you want to change the color,

select from the 24 available colors.

• Line width

Set the line width of the trip line in dots (1 to 3).

5.1 Setting Display Groups

Содержание Daqstation DX2000















































































































































































































































































































































































Результаты поиска

Содержание Daqstation DX2000

Отзывы:

Похожие инструкции для Daqstation DX2000

Бренды по названию

Популярные бренды

YOKOGAWA Daqstation DX2000, Руководство пользователя

Результаты поиска

Содержание Daqstation DX2000

Отзывы:

Похожие инструкции для Daqstation DX2000

Бренды по названию

Популярные бренды