YOKOGAWA CQ1, Руководство пользователя, Страница: 239 / 268

<7. Trouble Shooting>
7-1
IM 80J01A01-01E
7 Trouble Shooting
7.1 Trouble Shooting during Measurement Preperation
Problem Probable Cause / Corrective Action
The power cannot be turned ON.
It might be that the power plug is not
connected to the power outlet.
⇒
Check the connection between
them.
It might be that CQ1 Main Unit and
Utility Box are not conneted by the
power calbe.
⇒
Check the connection between
them.
It might be that the main power switch
on the front panel of Utility Box is not
turned ON.
⇒
Turn the Power switch ON.
The door of CQ1 Main Unit can not
open. It might be that the initilalization does
not end.
⇒
Wait until the initialization ends.
It might be that the measurement is
being processed.
⇒
Wait until the measurement ends.
⇒
It may take time for door opening
in case that stage speed is set to
low.
The stage does not run
．
It might be that the door of CQ1 Main
Unit is open.
⇒
Close it.
It might be that sub cover of CQ1
Main Unit is open.
⇒
Close it.
The micorplate can not be set on the
stage. It might be that the stage attachment
for microplates is not set on the
stage.
⇒
Set the stage attachment on the
stage.
⇒
The microplate can not be set
depending on its shape. For detail,
please contact the dealer
※
1
.
The slideglass(es) can not be set on
the stage. It might be that the stage attachment
is not set on the stage.
⇒
Set the stage attachment on the
stage.
It might be that the sample holder for
slideglass is not set on the stage
attachment.
⇒
Set the slideglass(es) on the
sample holder for slideglass and
set sample holder on the stage
attachment.