IM CA500-02EN
37
3 Common Operations
3.1 Opening and Closing Setup Screens
To open a setup screen, press the appropriate key on a screen showing the
measured value or source value.
After entering the settings, to confirm the settings and close the screen, select Exit
Setup from the selection menu.
When you press the ESC key to close the screen, the changes are not applied.
Initializes the settings
Confirms the settings and
closes the setup screen
3.2 Setup Screen Operation
On the setup screen, the highlighted item is selected.
To open the next menu, press ENTER.
To change the selected item, press the cursor keys (UP/DOWN key).
ENTER key
Selected item
Use the cursor keys (UP and DOWN key) to select an item.
The operation varies depending on the item you are setting.
Items selected from a list of options:
When you select an item, the available options are displayed in the selection
menu (see section 3.3).
Items that require a value to be set:
Select an item, and then press ENTER. The value appears at the bottom of
the screen (see section 3.4).
Items that require alphanumeric characters to be set:
Select an item, and then press ENTER. A window appears for entering
alphanumeric characters (see section 3.5).
Содержание CA550
Страница 3: ......
