4.2 Error Messages
Error Messages
Messages may appear on the screen while you are using this instrument. This section
describes the error messages and the corrective action to take. If the corrective action
states that serving is required, contact your nearest YOKOGAWA dealer. In addition to
the messages listed here, other communication-related error messages may also appear.
These error messages are described in the
Communications Interface User’s Manual
(IM 735101-17EN)
.
Frame Controller
Code Error Message
Description
Corrective Action
600
File System Error
The file system is corrupt.
Try again with a different USB memory device. If
the same message continues to appear, servicing
is required.
649
Unknown file or folder
The specified file or folder cannot be
found.
Check the file or folder name.
678
USB memory can not be
recognized
The instrument could not detect the
USB memory.
Contact your nearest YOKOGAWA dealer for
details on what USB memory devices have been
confirmed to work with the instrument.
729
Module Not Implement
The module that you are trying to load
the file into is not installed.
Install the module that you are trying to load the file
into.
730
File Sum Check Error
The file may be corrupt. Alternatively,
the instrument could not load a setup
file that was saved on an AQ2201/
AQ2202 frame controller.
Recreate the file that you are trying to load. You
cannot load setup files that were saved on an
AQ2201/AQ2202 frame controller. Create setup
files on an AQ2211/AQ2212 frame controller.
731
File Already Exist
The same file already exists.
Check the file that you are trying to load. If you are
sure, delete the already existing file.
732
File Open Error
The file could not be loaded. The file
may be corrupt.
Recreate the file that you are trying to load.
733
Module Type Error
The module type stored in the file that
you are trying to load is not the same
as the installed module type.
Make the module type stored in the file that you
are trying to load the same as the installed module
type.
734
Illegal Parameter
There is an invalid module setting in
the file that you are trying to load.
Use a file that contains valid module settings.
735
Product Error
The module product name stored in
the file that you are trying to load is not
the same as the product name of the
installed module.
Make the module product name stored in the file
that you are trying to load the same as the model
product name of the installed module.
736
Option Error
The module option information stored
in the file that you are trying to load is
not the same as the option information
of the installed module.
Make the module option information stored in the
file that you are trying to load the same as the
model option information of the installed module.
737
Software Version Error
The module software version stored in
the file that you are trying to load is not
the same as the software version of the
installed module.
Make the module software version stored in the file
that you are trying to load the same as the software
version of the installed module.
738
File Size Error
The data size of the file that you are
trying to load is invalid.
You cannot load setup files that were saved on an
AQ2201/AQ2202 frame controller. Create setup
files on an AQ2211/AQ2212 frame controller.
741
Module Error
The module type stored in the file that
you are trying to load is invalid.
Use a file that contains a valid module type.
742
Format Version Error
The format version stored in the file that
you are trying to load is not the same
as the format version of the installed
module.
Make the format version stored in the file that you
are trying to load the same as the format version of
the installed module.
743
SG Module Error
The SG module that you are trying to
load the file into is not installed.
Install the SG module that you are trying to load
the file into.
744
ATTN Module Error
The ATTN module that you are trying to
load the file into is not installed.
Install the ATTN module that you are trying to load
the file into.
4-6
IM 735101-01EN
