1-49
IM AQ1300-01EN
Features
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
1.17 VLAN Test
The VLAN Test is used to check the VLAN trunk configuration. You can compare the VLAN ID list that
you plan to receive with the actual received VLAN ID list. Then, you can display the results or save
them to a file.
Transmission
The AQ1300/AQ1301 transmits VLAN ID frames according to the VLAN ID list set on the AQ1300
using up to 4096 VLAN IDs. A VLAN ID definition file can also be loaded into the VLAN ID list.
Transmittable Frame Formats
• When the test layer is L2:
MAC+TYPE(0x00)
• When the test layer is L3-IPv4: MAC+TYPE+IPv4
MAC+TYPE+IPv4+UDP
• When the test layer is L3-IPv6: MAC+TYPE+IPv6
MAC+TYPE+IPv6+UDP
Reception and Analysis
The AQ1300/AQ1301 compares the list of the VLAN IDs that are planned to be received with the
actual received VLAN IDs and displays the result. You can edit VLAN ID lists on the AQ1300/AQ1301
or load VLAN ID definition files into the VLAN ID list.
Display Format
Map or list
The comparison results are displayed in different colors: Rx ID success (green), Rx ID fail (yellow),
and RX ID error (red).
Saving Result Files
Received and analyzed result files can be saved in the AQ1300/AQ1301 in binary format (.mr
extension). Saved result files can be uploaded to a Windows PC with the Setup Software.
