15-5
IM AQ1300-01EN
Other Operations
15.4 Configuring Network Settings
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
Note
• The AQ1300/AQ1301 terminates the connection if there is an error in the user authentication process.
• You do not need to enter a password when the user name is set to “anonymous.”
Timeout Value
The connection to the network is automatically disconnected if there is no access to the AQ1300/
AQ1301 for the specified time.
Range: 0 to 3600 s
The AQ1300/AQ1301 will not time out if you set the timeout value to 0. If the AQ1300/AQ1301 is
connected to a network and the connection between the AQ1300/AQ1301 and another device is
broken abnormally due to an external cause, the AQ1300/AQ1301 will remain connected to the
network until the power is turned off. To avoid this kind of situation, we recommend that you set a finite
timeout value.
TCP/IP Settings
DHCP
If you are connecting the AQ1300/AQ1301 to a network with a DHCP server and you want to use
the server, set DHCP to “ON.”
ON
The IP address, subnet mask, and gateway information is assigned automatically.
OFF
You must enter the IP address, subnet mask, and gateway information.
• Ask your network administrator whether or not DHCP is available.
• When DHCP is set to ON, the information can change whenever you restart the AQ1300/
AQ1301 or enable or disable the network setup as described in the previous section. Check the
information when you access the AQ1300/AQ1301 from a PC.
IP Address
You can set the IP address assigned to the AQ1300/AQ1301. The IP address is an ID that is
assigned to each device on a network such as the Internet or an intranet. Obtain an IP address from
your network administrator. In a network that supports DHCP, this parameter is set automatically
when DHCP is set to ON.
Subnet Mask
You can set the mask value used to determine the subnet network address from the IP address.
Networks such as the Internet are often divided up into smaller networks called subnetworks. The
subnet mask is a value that specifies the number of bits of the IP address that are used to identify
the network address. Consult your network administrator for the subnet mask value. In a network
that supports DHCP, this parameter is set automatically when DHCP is set to ON.
Gateway
You can set the IP address of the default gateway (which is a gateway used to communicate with
other networks). The default gateway handles data exchange between multiple networks so that
data transmission proceeds smoothly. Consult your network administrator for the default gateway
value. In a network that supports DHCP, this parameter is set automatically when DHCP is set to
ON.
