13-17
IM AQ1300-01EN
Y.1564 T
est
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
13.6 Configuring the Detailed Settings (Service
Setup) of the Y.1564 Test
Service Setup Screen
• Standalone
Follow the procedure in section 13.1 to display the Y.1564 Setup screen.
Press the
Service Setup
soft key to display the Service Setup screen.
• MasterDevice
Follow the procedure in section 13.8 to display the Y.1564 Setup screen.
Press the
Service Setup
soft key to display the Service Setup screen.
Set the service circuits to run the Y.1564 test on.
Set the test frame length and Tx rate.
Switch between the master and slave
(Master, Slave).
Press this soft key to switch between the
displays of the master and slave settings.
The settings that appear are the service
and detailed service settings.
Select the services (Service 1-Service 8).
Select the service numbers to display the
detailed settings of.
Detail settings
Set the details of test frames.
Unit settings ►section 13.5
Detail Screen of Service Setup
Press the
Detail
soft key to display the following screen.
Set the service type
(Data, Voice, Video).
Set the frame length
(64, 128, 256, 512, 1024, 1280, 1518,
MTU, USER, EMIX).
Set the payload pattern
(Random, All 0, All 1, 0/1)
Set the frame structure. ►section 1.6
Set the color (OFF, CoS, ToS, DSCP).
Set the SLA (Service Level
Agreement).
Set the traffic conditions such as the
committed information rate and excess
information rate.
Set the channel number (1 to 367647).
When Test Layer is set to L3-IPv6, the IPv6 address is always used (fixed).
