12-11
IM AQ1300-01EN
E-OAM T
est
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
12.5 Configuring the LB Test
Procedure
LB Setup Screen
Follow the procedure in section 12.1 to display the E-OAM Test Setup screen.
Follow the procedure in section 12.3 to display the Select Test Mode screen, and then select LB (L2
Ping). The following screen appears.
Set the interval
(1ms, 10ms, 100ms, 1s).
Set the frame length (actual).
( VLAN 1 stack: 64 (68) to 9999 (9999) bytes
VLAN 2 stacks: 64 (72) to 9999 (9999) bytes)
Refer to the frame length table. ►section 4.5
Refer to the Tx Time table. ►section 4.5
Set the Tx mode
(Continuous, Frames, Time).
Set the Tx mode length
This setting appears when Tx Mode is set
to Time or Frames
(Frames: 1 to 4294967295
Time: 1 to 1440 min)
Explanation
Interval
Set the LBM frame transmission interval.
1ms, 10ms, 100ms, 1s
Tx Mode
Set the length of the LB test.
• Continue: An LB test is executed from the start of the test (pressing of the START button) to the
end of the test (pressing of the STOP button).
• Time: An LB test is executed until the specified time elapses.
1 min to 1440 min (24 hours)
• Frames: An LB test is executed until the specified number of frames are transmitted.
1
to
4294967295
Tx Time and Frame Length Tables
You can refer to the tables to select the values.
The table is created on the setup software. For details, see the
Setup Software User’s Manual
.
Frame Length (Actual)
Set the frame length of Tx frames. The actual frame length of the specified frame is also displayed.
• VLAN 1 stack: 64 (68) to 9999 (9999) bytes
• VLAN 2 stacks: 64 (72) to 9999 (9999) bytes
