6-50
IM AQ1300-01EN
6.10 Configuring the Statistics Log
Procedure
Statistics Log Setting Screen
Press the
Manual
soft key, the
Next 1/2
soft key, and then the
Statistics Log Setting
soft key to
display the following screen.
Set the maximum logging time (1-14400 s).
Set the end setting (Stop, Overwrite).
Select the items that you want to log the
statistics of (up to four items).
Select this check box to execute
logging.
Set the statistics log items.
Save the log after measurement is
complete.
Select this check box to log using
current values (appears when the group
is set to Latency or CH1-8 RX).
Statistics Item Set
Press
Detail
next to the statistics log item that you want to set to display the following screen.
Set the item.
Set the group.
Explanation
Execute Logging
Select whether or not to execute logging.
• Selected: Logging is executed.
• Cleared: Logging is not executed.
Max Logging time
Set the maximum logging time.
Range: 1 to 14400 s
End Setting
Specify what to do after the maximum logging time has been exceeded.
• Stop: Logging is stopped. When the maximum logging time has been exceeded, logging
stops.
• Overwrite: Old logs are overwritten by new logs.
