6-34
IM AQ1300-01EN
Tx Mode Setting Screen
Press the
Detail Setup
soft key and then the
Tx Mode Setting
soft key to display the following screen.
Set the Tx mode
(Continuous, Frames, Time).
Set the time (1-86400 s).
This setting appears when Tx Mode is set
to Time.
Set the number of frames
(1-4294967295).
This setting appears when Tx Mode is set
to Frames.
Rx QoS Setting Screen
Press the
Detail Setup
soft key and then the
Rx QoS Setting
soft key to display the following screen.
Configure the frames. ►section 6.5
Frame structure indication
Select this check box to use CH8 as the
Other channel.
Select the QoS channels that you want
to receive.
Set the Rx QoS (Classify by Frame ID, Classify by Tx Frame,
Manual).
Channel ID and ID pattern settings are invalid when Classify by Frame
ID or Classify by Tx Frame is specified.
Select the QoS filters to use.
Set the classification type.
Valid when the Rx QoS is set to “Classify
by Tx Frame”
QoS test type indication
Configure the Rx QoS filters.
Set the input format (DEC, HEX).
Set QoS patterns 1 and 2.
Specify the settings for the selected QoS
fill patterns.
Set the QoS pattern values.
Note
The AQ1300/AQ1301 will receive the type of frames specified by the Frame Structure setting.
6.7 Configuring a QoS Test
