4-11
IM AQ1210-01EN
Performing A
veraged
Measurements
11
22
33
44
55
66
77
88
99
10
10
11
11
App
App
Index
Index
4.4 Saving Measured Data
4.
Tap the
Auto Save
button on the auto save screen.
The auto save feature is turned on. Each time you tap, the value switches between ON and OFF.
For details on the auto save screen, see “Configuring Auto Save (when averaged measurement is
complete)” in section 2.1.
Automatic saving (OFF, ON)
Select the save
destination.
Current save destination
Explanation
Saving Directly
When you tap the floppy disk icon, measured data is saved. The file save format is shown on the
floppy disk icon.
When the icon displays SOR
Measured data is saved as waveforms.
When the icon displays PDF
Measured data is saved as a report file in PDF format.
When the icon displays SOR+PDF
Waveform data is saved as waveforms and as a report file simultaneously.
Saving Waveforms during Averaged Measurement
You cannot save waveforms during averaged measurement. Save measured data after averaged
measurements have been completed. When measured data is saved, MAP display data is also
saved in memory.
If you set the auto save feature to on, waveforms and MAP display data are saved in memory when
averaged measurements are completed.
Saving Waveforms during Real-Time Measurement
If you save waveforms during real-time measurement, waveform data at that point is saved in
memory. If real-time measurement has been completed, waveforms shown on the data display
screen are saved in memory. If event analysis is performed on real-time measurement waveforms,
MAP display data is also saved in memory.