YOKOGAWA AQ1210D Скачать руководство пользователя страница 223

Страница: 223 / 290

8-49

IM AQ1210-01EN

Using the

Application Feature

App

Index

Soft Key Menu (multi trace)

Tap the soft key menu display button. A multi trace soft key menu appears.

Soft key menu

Multi Trace Analysis Menu

Load analysis waveforms.

Set markers (4 Point Markers).

See page 6-8.

Selects the current trace (Trace 1, Trace 2, Trace 3, Trace 4)

Select the waveform to place markers and cursors on or move vertically.

Moves the trace up

Moves the display position of the current trace up.

Moves the trace down

Moves the display position of the current trace down.

• Loading Waveform Analysis

Clears the waveforms of Trace1 to Trace4

When already loaded, the measurement conditions

(wavelength, distance range, pulse width) are displayed.

When tapped, a file operation screen appears, and you

can load waveforms. See section 9.4.

When tapped, a file operation screen appears, and

you can load waveforms. See section 9.4.

8.5 Performing Advanced Analysis (Advanced Analysis)

Содержание AQ1210D



































































































































































































































































































Результаты поиска

Содержание AQ1210D

Отзывы:

YOKOGAWA AQ1210D, Руководство пользователя, Страница: 223 / 290

Результаты поиска

Содержание AQ1210D

Отзывы: