YOKOGAWA AQ1210D Скачать руководство пользователя страница 171

Страница: 171 / 290

7-37

IM AQ1210-01EN

Using the Utility Feature

App

Index

Executing a Judgment

Press the

Judge

soft key. A judgment is performed, and the result (summary) is displayed.

Before executing pass/fail judgment, adjust the fiber inspection probe knob to focus on the

image.

Core area

Clad area

Contact section

Clear

Clears the judgment results

Displays results

Displays the judgment

results (detail)

Starts saving

Press this soft key to save

a still image and a

judgment result file. For

the procedure to set the

file save destination, file

type, and file name, see

section 9.4.

Optical fiber cable type

Appears at all times for still images.

Pass/fail result (mark)

Judgment results (summary)

Appears when pass/fail judgment

is performed.

Displaying Judgment Results (Details)

Press the

Result

soft key to display the following screen.

Results in the core area

Results in the cladding

area

(excluding the core area)

Results in the contact

area

(excluding the core and

cladding area)

7.6 Using the Fiber Inspection Probe (/FST option)

Содержание AQ1210D



































































































































































































































































































Результаты поиска

Содержание AQ1210D

Отзывы:

YOKOGAWA AQ1210D, Руководство пользователя, Страница: 171 / 290

Результаты поиска

Содержание AQ1210D

Отзывы: