7-4
IM AQ1200-01EN
7.2 Editing Events
There may be cases where, because the backscattering light level is too small at a reflection point in
an optical fiber, the reflection cannot be detected as an event, or there may be cases where noise is
detected as an event.
In such cases, you can adjust the events by editing them as follows:
• Inserts events
• Deletes events
• Edit event markers
• Turn the event position fix feature on and off
Procedure
Editing Events
1.
Using the
rotary knob
and
ENTER
, select
OTDR
.
2.
Press the
Event Analysis
soft key and then the
Event Edit/Fix
soft key to display the following
screen.
When the suffix code is -HE, press the
Analysis
soft key, the
Event Analysis
soft key and then
Event Edit/Fix
soft key.
Inserts an event
You can insert events when Cursor is selected on the Rotary Knob soft key.
Deletes an event
You can delete events when Event is selected on the Rotary Knob soft key.
Selects the rotary knob function (Cursor, Event)
Turns the event position fix feature on or off
ON:
Event positions are fixed.
OFF:
Event positions are not fixed.
Edit event markers.
See “Editing an Event Marker” described later.
Inserting an Event
3.
Press the
Rotary Knob
soft key to select List. Press the
Ins. Event
soft key.
The following
screen appears.
A virtual event is inserted at the cursor position.
The inserted event is added to the event list.