8-3
IM AQ1200-01EN
Light Source (Option)
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Index
App
8.2 Turning On the Visible Light
WARNING
• While the AQ1200 is producing light, light is emitted from the light source port. Do not look
directly at this light. Visual impairment may occur if the light enters the eye.
• Close the covers of any light source ports that do not have optical fiber cables connected
to them. On models with two or more light source ports, visual impairment may occur if light
that is mistakenly emitted from the wrong port enters the eye.
Procedure
There are two types of operation screens that you can use to generate visible light: a screen that
displays the menus for both the measurement light source and the visible light source and a screen
that displays just the menu for the visible light source.
Measurement Light Source and Visible Light Source Screen
Using the
rotary knob
and
ENTER
, select
LS_OPM
(the power meter light source) to display the
following screen.
Turning the Light Source On and Off
Press the
LS VLS ON/OFF
soft key to display the following menu.
Turns the light on
The visible light turns on.
A mark appears on the
AQ1200 display to
indicate that the light is on.
Turns the light off
The light turns off. The
light mark disappears.
