3-11
IM AQ1100-01EN
Optical Power Meter
1
2
3
4
5
6
7
8
9
10
11
12
Index
App
Detailed Setup Screen
Press
SETUP
and then the
Data Save Logging
soft key to display the following screen.
Set the starting core number (1 to 9900).
Set the number of fibers or tapes (up to 100 fibers when
Tape no. Type is set to Off, up to 50 tapes when Tape no.
Type is set to a-b(2), ..., up to 12 tapes when Tape no. Type
is set to a-h(8)).
Set the tape number type (Off, a-b(2), a-c(3), a-d(4), a-e(5),
a-f(6), a-g(7), a-h(8)).
Saving Data to a File
Press
SETUP
and then the
File
soft key to display the file save screen. Follow the procedure in
section 9.2 to save the data.
Explanation
You can specify core numbers and tape number types and save data (measurement conditions and
measured values) to this Instrument internal memory. You can also save the data to a file.
Displayed List
You can set the list to show to one of the following options. The list display format changes depending
on the starting core number, tape number type, and number of fibers (or tapes) that you set in the
detailed setup screen.
Core List
A list of core numbers and the saved data of the highlighted core number are displayed.
List
The core numbers and saved data are displayed.
Example When the Starting Core Number Is Set to “5,” the Tape Number Type Is Set
to “a-h(8),” and the Number of Tapes Is Set to “10”
The list begins with the starting core number 5.
Each core number is divided into eight tape
numbers from a to h.
The list begins with the starting core number 5.
Each core number is divided into eight tape
numbers from a to h. The data for the core and
tape number pairs through 14h is displayed.
Use the rotary knob and the arrow keys to scroll
through the list.
Core List
List
There are 10 tapes, so the cores are
numbered 5a through 14h.
The data of the highlighted core and tape
number pair (5a here) is displayed.
3.4 Selecting and Saving Core and Tape Numbers
