YOKOGAWA AQ1100A Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 100

background image

i

IM AQ1100-01EN

Thank you for purchasing the AQ1100A, AQ1100B, and AQ1100D OLTS (Optical Loss Test Set) Multi
Field Tester.
This user’s manual explains the features, operating procedures, and handling precautions of the
AQ1100A, AQ1100B, and AQ1100D. To ensure correct use, please read this manual thoroughly before
operation. Keep this manual in a safe place for quick reference in the event that a question arises.
This manual is one of three AQ1100A, AQ1100B, and AQ1100D manuals. Please read all the manuals.

Manual Title

Manual No.

Description

AQ1100A, AQ1100B, AQ1100D OLTS

Multi Field Tester Operation Guide

IM AQ1100-02EN This guide focuses on the handling precautions,

basic operations, and specifications of the AQ1100A,

AQ1100B, and AQ1100D.

AQ1100A, AQ1100B, AQ1100D OLTS

Multi Field Tester

User’s Manual (included in CD)

IM AQ1100-01EN This manual. Explains all AQ1100A, AQ1100B, and

AQ1100D features, except for the communication

features, and how to use them.

AQ1100A, AQ1100B, AQ1100D OLTS

Multi Field Tester Communication

Interface User’s Manual (included in

CD)

IM AQ1100-17EN Explains the features related to using communication

commands to control the AQ1100A, AQ1100B, and

AQ1100D.

Notes

• The contents of this manual are subject to change without prior notice as a result of continuing

improvements to the instrument’s performance and functionality. The figures given in this manual
may differ from those that actually appear on your screen.

• Every effort has been made in the preparation of this manual to ensure the accuracy of its

contents. However, should you have any questions or find any errors, please contact your nearest
YOKOGAWA dealer.

• Copying or reproducing all or any part of the content of this manual without the permission of

YOKOGAWA is strictly prohibited.

Trademarks

• Microsoft, Windows, and Windows XP are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

• Adobe, Acrobat, and PostScript are trademarks of Adobe Systems Incorporated.
• In this manual, the TM and ® symbols do not accompany their respective registered trademark or

trademark names.

• Other company and product names are registered trademarks or trademarks of their respective

holders.

Revisions

1st Edition:   November 2009
2nd Edition:  December 2014
3rd Edition:  December 2015
4th Edition:   October 2017

4th Edition: October 2017 (YMI)
All Rights Reserved, Copyright © 2009 Yokogawa Electric Corporation
All Rights Reserved, Copyright © 2014 Yokogawa Test & Measurement Corporation

«
1
2
3
4
...
»

Содержание AQ1100A





































































































Отзывы:

Нет отзывов

Похожие инструкции для AQ1100A

Бренд: Febco Страницы: 12

Бренд: Yetter Страницы: 16

Бренд: Makita Страницы: 10

Бренд: Yamaha Страницы: 50

Бренд: A&D Страницы: 30

Бренд: JB-Lighting Страницы: 60

Бренд: Federal Страницы: 43

Бренд: Raven Страницы: 17

Бренд: Campbell Страницы: 12

Бренд: Labelmate Страницы: 61

Бренд: Labconco Страницы: 62

Бренд: Yamaha Страницы: 126

DM 2000 Version 2

Бренд: Yamaha Страницы: 8

Pendalyte 40472U

Бренд: Lightolier Страницы: 3

Бренд: Sabo Страницы: 76

Бренд: SCHUNK Страницы: 2

Бренд: Hammer Strength Страницы: 8

INTEGRA ARINC e-NAV

Бренд: Kannad Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды