Chapter 2 Operation
2.1 Installing the Unit
Installing the Unit
2
Op
eratio
n
•
•
Install or remove the unit with the main power of the AE5511 turned OFF
(STANDBY LED: OFF and POWER LED: OFF). Otherwise, malfunction may
result.
Attach blank panels to unused AE5511 slots to prevent accidents.
CAUTION
AE5511
Unit
1. Check that the main power of the AE5511 is turned OFF.
2. Align the unit with the slot guide of the AE5511 and insert it slowly toward the back of
the AE5511.
3. Press the panel section of the unit with your thumbs until the connectors on the unit
and AE5511 engage.
4. Fasten the two attachment screws of the unit to fix the unit in place.
Removing the Unit
Pull the lever
1. Check that the main power of the AE5511 is turned OFF.
2. Loosen the two attachment screws of the unit.
3. Pull the unit lever slowly toward you. The connectors disengage, and the unit
comes out from the AE5511.
4. Hold the attachment screw with each hand, and pull the unit slowly out from the
AE5511.
IM 731010-01E
2-1
