11
IM 701949-01EN
5. Specifications
Specifications
Item
Specifications
Probe length
1.3 m (excluding the pincher tip)
Weight
48 g (probe only)
Connector type
BNC (with probe ID pin)
Attenuation ratio
10 : 1 ±2 % (DC input)
*1
Frequency band
500 MHz (–3 dB)
Rise time
700 ps (typical)
*2
Propagation delay time
5.7 ns (typical)
*2
Maximum input voltage
±400 Vrms (EN61010-031)
*3
Input resistance
10 MΩ ±1 %
*1*4
Input capacitance
9.5 pF (typical)
*2
Matching input capacitance
10 pF to 25 pF (typical)
*2
Operating
environment
Temperature/
Humidity
0 °C to +50 °C
*5
(no condensation)
Altitude
2000 m or less
Storage
environment
Temperature/
Humidity
–40 °C to +71 °C (no condensation)
Altitude
15000 m or less
Compliant
standards
Safety standards EN61010-031
Measurement category "O"
*6
400 Vrms,
1250 V transient over-voltage
Measurement category II
*6
300 Vrms
Pollution degree 2
*7
Environmental
standards
EN50581
Monitoring and control instruments
*1 In combination with an oscilloscope with an input impedance of 1 MΩ ±1%.
Input voltage 100V or less. If 100 V exceeded, add a voltage coefficient of
0.0025%/V.
*2 “Typical” values are typical or average values and are not strictly guaranteed.
*3 Refer to “Compliant standards (Safety standards)”. See the figure below for
input voltage derating by frequency.
*4 See the figure below for input impedance derating.
*5 See the figure below for temperature vs. humidity derating.