manualshive.com logo in svg

YOKOGAWA 701924, Руководство пользователя

Поделиться
Скачать
YOKOGAWA 701924 Скачать руководство пользователя страница 13

1

IM 701924-01E

Product Overview

The PBDH1000 Differential Probe is a 1-GHz bandwidth, differential-input, 
active probe that is used in combination with a digital oscilloscope that has a 
YOKOGAWA probe interface (hereafter referred as digital oscilloscope with a 
probe interface).
To use the probe, you simply connect it to a BNC input terminal on a digital 
oscilloscope with a probe interface.

*  For information about digital oscilloscopes with a probe interface, contact your 

nearest YOKOGAWA dealer.

Features

•  Allows direct observation of differential signals
•  Common mode rejection capability
•  Wide frequency bandwidth from DC to 1 GHz
•  High input impedance (1 MΩ, approx. 1.1 pF between each input terminal 

and ground)

•  Able to receive power from a digital oscilloscope with a probe interface
•  Allows a digital oscilloscope with a probe interface to automatically detect the 

probe

•  Comes with various attachments that can be changed according to the item 

that you want to measure

•  Compact and lightweight

Содержание 701924































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды