YOKOGAWA 701210 Скачать руководство пользователя страница 91

Страница: 91 / 747

2-53

IM 701210-05E

Explanation of Functions

2.7

Waveform Analysis/Search

Displaying History Waveforms <Section 11.1>

Past waveform data (history waveforms) stored in the acquisition memory can be

displayed when waveform acquisition is stopped. You can display a specified history

waveform from the data (up to 2000 waveforms, or the number of triggers) stored in the

acquisition memory.

The number of waveforms N that can be acquired and held as history waveforms varies

from 1 to 2000 depending on the record length and acquisition mode settings. The

waveform currently displayed on the screen (newest waveform) is counted as the 1

waveform, and up to N–1 waveforms in the past can be displayed.

History Search Function <Sections 11.2 and 11.3>

You can search waveforms that match specified conditions from the waveform data in

the history memory.

Search by Zone

From the waveforms stored in the history memory, waveforms that passed or not passed

a specified area (zone) can be searched.

Waveform stored in the history memory

Selected Record No. 0

Selected Record No. –25

Specified area

Detects the waveform that
passed through the specified area

Search by Waveform Parameters

From the waveforms stored in the history memory, waveforms that meet or do not meet

the specified parameter conditions can be searched.

Waveform that was saved using the history memory function

Selected Record No. 28

Selected Record No. 0

T-Range2

Start Rec

End Rec

P-P

T-Range1

Detects a waveform
whose P-P exceeds
a specified range

Item Setup : P-P
Condition : OUT

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 701210

Отзывы:

YOKOGAWA 701210, Руководство пользователя, Страница: 91 / 747

Результаты поиска

Содержание 701210

Отзывы: