YOKOGAWA 701210 Скачать руководство пользователя страница 51

Страница: 51 / 747

2-13

IM 701210-05E

Explanation of Functions

2.2 Setting the Horizontal and Vertical Axes

Temperature Measurement <Section 5.16>

Thermocouple Types

The following types of thermocouples can be used.

K, E, J, T, L, U, R, S, B, N, W, and Au7Fe

Selectable Temperature Units

You can select

C, K, or

Reference Junction Compensation (RJC)

• The voltage generated by a thermocouple depends on the temperature of the spot of

measurement and the reference junction temperature. In this case, the function used

to compensate the temperature on the measurement instrument side to the cold

junction is referred to as reference junction compensation.

• You can turn ON/OFF the internal RJC circuit on the DL750/DL750P.

ON: Use this setting to enable the reference junction compensation by the internal

RJC circuit.

OFF: Use this setting when checking the temperature measurement value, or when

using an external reference junction (0

C).

Burnout

Specify the behavior when the thermocouple input detects a burnout.

ON:

Fix the measured value to the upper limit of the measurement range of each

thermocouple when a burnout is detected.

OFF: Burnouts are not detected.

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 701210

Отзывы:

YOKOGAWA 701210, Руководство пользователя, Страница: 51 / 747

Результаты поиска

Содержание 701210

Отзывы: