YOKOGAWA 701210 Скачать руководство пользователя страница 35

Страница: 35 / 747

1-8

IM 701210-05E

Other Keys

MEASURE CURSOR

RESET

SELECT

ALL CH

ACQ

START/STOP

SETUP

DISPLAY

ZOOM

DUAL

CAPTURE

HISTORY

MATH

CAL

X-Y

SEARCH

GO/NO-GO

DL750

• (SHIFT+) MEASURE Key (Sections 11.6 and 11.7)

Displays a menu used when performing automated measurement of waveform

parameters. Pressing the SHIFT key followed by the MEASURE key displays a

menu related to GO/NO-GO determination.

• CURSOR Key (Section 11.5)

Displays a menu used when performing cursor measurements.

• HISTORY Key (Sections 11.1 to 11.3)

Displays a menu used to recall data using the history memory function.

• MATH Key (Sections 10.1 to 10.5)

Displays a menu used when performing waveform computation.

• (SHIFT+) ZOOM Key (Sections 8.5 and 11.4)

Displays a menu related to the zoom display of waveforms. Pressing the SHIFT

key followed by the ZOOM key displays a menu related to data search (search &

zoom function).

• DUAL CAPTURE Key (Section 7.6)

Displays a menu related to the dual capture function.

• RECORDER Key (Chapter 9)

Available only on the DL750P. Displays a menu related to the recorder mode.

• (SHIFT+) SETUP Key (Sections 4.4 to 4.6)

Displays a menu used to initialize the settings to factory defaults, perform auto

setup, which automatically sets the DL750/DL750P according to the input signal,

store or recall setting parameters, and so on. Pressing the SHIFT key followed by

the SETUP key displays a menu related to calibration.

• (SHIFT+) DISPLAY Key (Sections 8.1 to 8.4, 8.6, 8.8 to 8.13)

Displays a menu related to the screen display. Pressing the SHIFT key followed by

the DISPLAY key displays a menu related to the X-Y display.

• ACQ Key (Sections 5.14, 7.2 to 7.4, and 7.7)

Displays a menu used to set the waveform acquisition mode.

• START/STOP Key (Section 7.1)

Starts/Stops waveform acquisition according to the trigger mode. Waveform

acquisition is in progress when the indicator above the key is illuminated.

• ALL CH Key (Section 5.13)

Displays a pop-up window containing a list of settings similar to those displayed on

the menu when one of the CH1 to CH16 or DSP1 to DSP6 (optional) keys is

pressed.

• RESET Key

Resets the value to the initial value.

• SELECT Key

Confirms the menu item that you selected using the jog shuttle.

• Arrow Keys (

Keys)

Moves the numeric entry digit (cursor) left or right.

1.2 Panel Keys and Knobs

MEASURE CURSOR

RESET

SELECT

ALL CH

ACQ

START/STOP

SETUP

DISPLAY

ZOOM

RECORDER

CAPTURE

HISTORY

MATH

CAL

X-Y

SEARCH

GO/NO-GO

DL750P

DUAL

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 701210

Отзывы:

YOKOGAWA 701210, Руководство пользователя, Страница: 35 / 747

Результаты поиска

Содержание 701210

Отзывы: