YOKOGAWA 701210 Скачать руководство пользователя страница 288

Страница: 288 / 747

7-22

IM 701210-05E

File Name When Action Is Set to Save to File or Image

If the Auto Naming of the File menu or the Image Save menu is OFF, numbers are

automatically assigned to the file names. Otherwise, the file is saved using the specified

method.

For details, see section 13.11, “Saving the Screen Image Data” or section 13.7, “Saving/

Loading Waveform Data.”

Send Mail Operation

Sends e-mail messages to the address specified using Network > Mail Setup > Mail

Address in the MISC menu.

Setting the Execution Mode of the Action-on-Stop at Power ON: Action Mode

(Power ON)

You can select whether to enable action-on-stop at power-on For example, turn this ON

if you wish to continue the action-on-stop operation after a power failure.

ON:

At power ON, the action-on-stop is set to the mode that was used when the power

was turned OFF.

OFF: Action Mode is turned OFF at power ON.

The initial setting is OFF.

Notes When Using the Action-on-Stop

• Action-on-stop cannot be used if the acquisition mode is Average.

• You cannot change the settings while the action-on-stop is in progress.

• The action-on-stop operation may slow down if there is access from the network while

the following action is in progress.

Printing/saving of the screen image data and saving of the waveform data

• You cannot use action-on-stop when the dual capture function is ON or when the

realtime recording to the internal hard disk is ON.

Notes When Action Is Set to Save to File or Image Save

• Do not specify the root directory of the medium as the save destination directory.

(Only up to 512 files can be saved to the root directory of a medium that has been

formatted using the DL750/DL750P.)

• The maximum number of files that can be created in a single directory is 5000. Do

not place files in the save destination folder before starting the action-on-stop

operation.

• If you select Save to File and Image Save simultaneously, separate the folders

specified by the FILE menu and the IMAGE SAVE menu.

• If you selected Numbering for the file name assignment method (Auto Naming) in the

FILE menu and the IMAGE SAVE menu, the creation of files takes an extended

period when the number of saved files becomes large. When creating more than

2000 files, select Date for Auto Naming.

• When 5000 files are saved, the action-on-stop operation ends.

7.8 Setting the Action-on-Stop

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 701210

Отзывы:

YOKOGAWA 701210, Руководство пользователя, Страница: 288 / 747

Результаты поиска

Содержание 701210

Отзывы: