YOKOGAWA 701210 Скачать руководство пользователя страница 102

Страница: 102 / 747

2-64

IM 701210-05E

Saving and Loading Setup Data, Waveform Data, and Snapshot Waveform Data

The setup data, waveform data, and snapshot waveform data can be saved to or loaded

from a specified storage medium.

When a waveform that has a voice memo recorded is saved, the voice memo is saved

along with the waveform data.

Saving the Results of the Automated Measurement of Waveform Parameters

The results of the automated measurement of waveform parameters can be saved to a

specified storage medium.

Creating a PDF File of the Print Image (DL750P Only) <Section 13.13>

By setting the output destination in the DL750P PRINT menu to “PDF,” a PDF file of the

print image (image similar to fine print (see section 12.2)) can be created. A print image

of the specified range and magnification is created to the specified file name on the

specified storage medium simply by pressing the PRINT key.

Voice Comment Function <Sections 3.14 and 13.19>

A voice comment can be attached to screen image data to be saved. The maximum

length of voice comment that can be attached to a single screen image data is 10 s. The

saved voice comment can be played from the File List window

of the IMAGE and FILE

menus.

The voice comment function can perform the following operations.

Record: There are two record methods.

• Record a voice comment before saving the screen image data by pressing

the PUSH switch on the earphone microphone connected to the DL750/

DL750P.

• Record a voice comment by pressing a button on the dialog box that

appears when the screen image data is saved.

Save:

Saves the voice comment along with the screen image data.

Play:

When screen image data with a voice comment is selected on the File List

window

of the IMAGE or FILE menu, the voice comment is played along with

the thumbnail display.

1. For a description of the File List window, see section 13.12, “Displaying Thumbnails of the

Saved Screen Image Data.”

• Screen image data

• Voice comment data

Record time: 10 s

Can be saved simultaneously. (Screen image
data and voice comment data are saved as
separate files.)

Extension

.PNG
.JPG
.BMP
.PS

Extension

.NCM
.JCM
.BCM
.PCM

Note

A voice recorded when waveform acquisition is stopped becomes a voice comment.

2.9 Other Useful Functions

Содержание 701210












































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 701210

Отзывы:

YOKOGAWA 701210, Руководство пользователя, Страница: 102 / 747

Результаты поиска

Содержание 701210

Отзывы: