YOKOGAWA 700938 Скачать руководство пользователя страница 12

11

IM 700938-01E

Specifications

Product Specifications

Compatible sensors

700937 Current Probe

700939 FET Probe 

701920 Differencial Probe

701930 Current Probe 

701931 Current Probe

701932 Current Probe 

701933 Current Probe

Number of power supply connectors

2

Output voltage

±12 V  ±0.5 V

Operating temperature and humidity range

0 to 40°C (32 to 104°F), 80% RH or less (no 

condensation) 

Storage temperature and humidity range

-10 to 50°C (14 to 122°F), 80% RH or less (no 

condensation)

Location for use

Indoor, altitude up to 2000 m (6562 feet)

Rated output current

600 mA (the total value of both outputs)

Rated supply voltage

100 V AC (120, 220, and 240 V requires specification)

(Voltage fluctuation of 10% from the rated supply 

voltage are taken into account.)  

Ripple supply voltage

3 mVp-p (at the rated output current)

Rated supply frequency

50/60 Hz

Maximum rated power

60 VA (at the rated output current)

External dimensions

Approx. 73(W) × 110(H) × 186(D) mm

Approx. 2.87”(W) × 4.33”(H) × 7.32”(D)

Mass

Approx. 1.1 kg

Approx. 38.8 oz.

Accessories

Power cord, Instruction manual,

Spare fuse (in the fuse holder)

100 V, 120 V : F1.0 AL/250 V, 20 mm × 5 mm dia.

220 V, 240 V : F0.5 AL/250 V, 20 mm × 5 mm dia.

Standards Applying

Safety

EN61010-1

Pollution Degree 2

EMC

Emission

EN61326-1 Class B

EN55011 Class B, Group 1

EN6100-3-2 Class B

EN6100-3-3 

EMC standards of Australia and New Zealand 

EN55011 Class B, Group 1

Immunity

EN61326-1 Table 1 (Basic immunity requirement)

Corrective Action to be Taken in the case of an Abnormality

•  If an message appears on the screen, refer to the following pages.
•  If maintenance service is required, or if the instrument still does not operate 

properly even if the proper corrective action has been taken, contact your 
nearest YOKOGAWA representatives, listed on the back cover of this manual.

Symptom

Possible Cause

Corrective Action

The power cannot be turned ON.

The fuse is blown.

Replace the fuse.

  

Содержание 700938













Отзывы: