11-5
IM 2558A-01EN
GP-IB Option
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
11.3 Configuring the 2558A GP-IB Settings
This section explains the following setting for controlling the 2558A remotely through a GP-IB interface:
Procedure
Setting the GP-IB Address
These turn off when the setting is confirmed.
5. Confirm the setting.
2. Select GPIB.
1. Select SETUP.
3. Turn a dial to select ADRS.
4. Set the address.
Use the deviation dial 1 to set the tens digit.
Use the deviation dial 2 to set the ones digit.
1.
Turn the
FREQUENCY
dial to select SETUP.
The indicator corresponding to the selected SETUP range illuminates, and the frequency/phase angle
display area shows the SETUP menu.
2.
Turn the
VARIABLE
dial to select GPIB.
3.
Turn a
main setting
dial to select ADRS.
4.
Turn the
deviation
dials to select the address.
When you change the setting, all four preset indicators will illuminate.
5.
Flip the
PRESET
switch up or down.
The setting is confirmed, and all the preset indicators turn off.
Command Type
These turn off when the setting is confirmed.
7. Turn either dial to
select NORM or COMP.
8. Confirm the setting.
6. Turn a dial to select TYPE.
6.
Turn a
main setting
dial to select TYPE.
7.
Turn a
deviation dial
to select NORM or COMP.
When you change the setting, all four preset indicators will illuminate.
8.
Flip the
PRESET
switch up or down.
The setting is confirmed, and all the preset indicators turn off.
