Yoder Smokers S Series, Руководство по эксплуатации

Страница: 20 / 70

20
NOTABLE DASHBOARD FEATURES
• You can change the pit’s setpoint by tapping on the setpoint in the grey banner (Figure 17) . Simply
enter your new desired setpoint and tap the “Set” button. Please note that changes to the setpoint
take a few seconds to take effect. Please be patient for them to be reflected in the cooker and in the
app’s dashboard.
• The names of the two probe ports can be set according to what you’re cooking. Tapping on the
probe port in the grey banner will allow you to change its name (FIG 18) . This name will also be used
in the various charts throughout the app.
• An alert – in the form of an app alert, an SMS text message, or an email – can be set to let you know
when one of the meat probes are at a certain temp. Simply tap on the temperature shown for the
probe in the grey banner, tapping “Add New Alert,” then “Set Up Alert” and set up your parameters
(FIG 18, 19) .
Alerts can be restricted to only occur during specific times of the day or at a given frequency by
using the “Custom Start/Stop Time” selection. Please note that SMS text and email alerts require a
little bit of set-up in the settings screen, which is described later in this document.
FIG 18 FIG 19 FIG 17