Yo-Yo Desk 32 Series Скачать руководство пользователя страница 1

Страница: 1 / 4

CAUTION

Assembly Manual

CAUTION

WARNING

Page 8 / 8

Do not place your hand near the strut.
Strut's angle will change during the
desktop lifts and it may hurt you.

Hands Pinching

Please read all instructions carefully before using this product. Retain this

manual for future reference. The specifications of this product may vary slightly

from the illustrations and are subject to change without notice.

Please don’t put your hands on the supporting

bars, as they move during adjustment and

may cause injury.

Please make sure that all equipment is fully on top of

the

Yo-Yo Desk

, not hanging over the edges, as it

may fall and cause harm/get damaged.

When using the adhesive Cable Ties, make sure

that you leave enough length in the cable to allow

for the full range of height adjustment, otherwise

your equipment may get damaged.

When first using your desk, please carefully set it to

its maximum height, to check that you can raise the

desk without causing damage to your equipment or

yourself.

Please ask someone to assist you when lifting the

desk to prevent causing harm or injury.

1-800-768-9936

[email protected]

Содержание 32 Series

Страница 1: ...cause injury Please make sure that all equipment is fully on top of the Yo Yo Desk not hanging over the edges as it may fall and cause harm get damaged When using the adhesive Cable Ties make sure th...

Страница 2: ...3lbs WEIGHT TOLERANCE LEVEL B Maximum 4lbs The Desktop and Keyboard Tray have a defined weight tolerance level Do not exceed the maximum bearing weight WARNING Keyboard Pads Cable Management Clip 2 x...

Страница 3: ...Please put your equipment on top of the Yo Yo Desk Please take the Yo Yo Desk out of the packaging and place it on your table desk CAUTION Please place the Yo Yo Desk on a surface suitable to hold the...

Страница 4: ...e you are tightening each screw through the bottom with the use of a Philips screwdriver Do one at a time 2 Adjust the desk to your appropriate sitting standing heights by LIFTING THE LEVER on the rig...