Yingang YG48Q-5A, Руководство по обслуживанию

Страница: 95 / 144

YG48Q-5A Maintenance ManualFrame and exhaust system
108
Headlamp dimming
Before driving, check the brightness, direction, etc. of the
headlamp.
The adjustment can be made to the headlamp in the left /
right and vertical directions.

Loose the screw to disassemble the headlight.

Rotating , directly unplugging

Rotating and disassemble the bulb.

Install the new bulb in reverse order
Headlight bulb 13.5V16.2/5.8W
Position lampbulb

Unplugging the sidelight seat

Unplugging the sidelight bulb
Replacement of turn lamp bulb

Loosen the screws, remove the lamp lampshade

Lightly press bulb, rotate in counter-clockwise.

Install new bulb in opposite order as below.
Front and rear lamp bulb12V1.5W
Taillight
、
Taillight bulb

Loosen the screws, remove the taillight lampshade

Lightly rotate taillight seat, take out the seat and
bulb.

Lightly press bulb, rotate in counter-clockwise.

Install new bulb in opposite order as below.
Taillight bulb
：
13.5V 1.2/2W
Removal / installation of exha ust muffler
To remove the exhaust muffler:

Park the motorcycle on the plane ground with main
stand; pull off the oxygen sensor patch plug.
Adjusting
bolt
Adjusting
bolt
BULB
Bulb
Taillight lampshade
BULB