NR120 5G Router User Manual
44
3.3.4.4 IPSEC
Connect Status and Control
Show IPSEC connection and status of current Router on IPSEC page.
Name:
the name of IPSEC connection
Type:
The type and function of current IPSEC connection
Common name:
local subnet, local address, opposite end address and
opposite end subnet of current connection
Status:
connection status: closed, negotiating, establish
Closed:
this connection does not launch a connection request to opposite
end
Negotiating:
this connection launch a request to opposite end, is under
negotiating, the
connection has not been established yet
Establish:
the connection has been established, enabled to use this
tunnel
Action:
the action of this connection, current is to delete, edit, reconnect and
enable
Delete:
to delete the connection, also will delete IPSEC if IPSEC has set
up
Edit:
to edit the configure information of this connection, reload this
connection to make
the configuration effect after edit
Reconnect:
this action will remove current tunnel, and re-launch tunnel
establish request
Enable:
when the connection is enable, it will launch tunnel establish
request when the
system reboot or reconnect, otherwise the connection will not do it
Add:
to add a new IPSEC connection
Add IPSEC connection or edit IPSEC connection
Type:
to choose IPSEC mode and relevant functions in this part, supports
tunnel mode client, tunnel mode server and transfer mode currently
