Remark: User cards can be added or deleted continuously. If you have set a new Manager
Add Card, you can’t recover recently deleted all user cards.
NO
Mark
Color
Function
Remark
1
Unused
Pink
Unused
2
Unused
Pink Blue
Unused
3
DO
Green
WG DATA0
4
D1
White
WG DATA1
5
Unused
Grey
Unused
6
OPEN
Yellow
Exit Button
7
D_IN
Brown
Door Contact
8
12V+
Red
Power+
9
GND
Black
Power-
10
NO
Blue
Relay NO output
11
COM
Purple
Relay Com output
12
NC
Orange
Relay NC output
1.Technical parameters
NO
Item
Value
1
Operating voltage
DC 12V±10%
2
Static current
≤
10mA
3
Dimensions
U200:135mm×58mm×22mm
4
Weight
U200:500g;
5
Ambient temperature
-40
℃
-
60
℃
6
Relative humidity
10%—90%
7
Storage
2000users
8
Card type (alternative)
EM(ID) card(IC card for options)
9
Card reading distance
1
－
15CM
WIFI One-door Access Controller
Introduction
This access control use newest microprocessors and high-speed long-life EEPROM
non-volatile memory, card reader and mobile phone APP controller integrated design, with
a simple circuit, low power consumption, simple operation, stable and reliable and
outstanding advantages.
Support opening door by mobile APP,APP can open/close door timing, countdown
open the door ; APP can manage numerous access control, managers can share
countless users and other functions, APP using WAN connection.
User Manual
V2.5
4. Installations Guide:
4.1 Wire Connection
:
4.2 Diagram
2.How to set Manager Card
Step1
、
Turn off power and connect bin 2&3 of INI (J2) to restore factory settings
( users will not be deleted, if added)
。
Step2
、
Turn on power and green light. now read two empty cards ,first one as
Manager Add Card and Second one as Manager Delete Card
Step3
、
Turn off power, disconnect bin2&3 and connect bin 1&2 of NOR
。
Step4
、
Turn on power again.
3. How to use Manager Card – MAC&MDC
To add a card user in standby mode: read MAC read new cards
read MAC
To delete a card user in standby mode: read MDC read registered cards
read MDC
To delete all users in standby mode: read MDC read MAC
read MDC
To Recover recently deleted all user cards: read MAC read MDC
read MAC
