14
Bike Setup
setup
tools needed
Shock Pump
Tape Measure
4mm allen key
time
15-20 minutes
Yeti tips
Inspect your shock and make sure it is in good
condition. If oil is leaking or there is visible
damaged. The shock should be returned to an
Authorized Fox Racing Shox service center for
repair.
To remove the shock from the linkage will
require the Yeti linkage tool. The linkage tool
is necessary to properly disassemble and
reassemble the linkage. Using a hammer to tap
out the pin can cause damage to the linkage and
shock. It can be purchase at our online www.
yeticycles.com or through an authorized dealer.
